Burchell Lightning Protection Logo and Header
NAVIGATION
• •  HOME
• •  About Us
• •  Capabilities
• •  Myths
• •  Project Portfolio 1
• •  Project Portfolio 2
• •  Project Portfolio 3
• •  Contact Us
• •  Links
• •  Privacy Policy
PRODUCTS
• •  Air Terminals & Accessories
• •  Bases
• •  Conductors
• •  Connectors
• •  Fasteners
• •  Grounding
• •  Roofing Components
• •  Specialty Items

• •  Catalogue PDF
• •  Calculators

SPECIALTY ITEMS

Threaded Rod
THREADED ROD – TR
TR1B 3/8 Brass 3/8" – 16 x 6' (183 cm)
TR2B 1/ Brass 1/ " – 13 x 6' (183 cm)
TR2A 1/ Aluminum 1/ " – 13 x 6' (183 cm)
TR2S 1/ Stainless steel 1/ " – 13 x 6' (183 cm)
TR3A 5/8 Aluminum 5/8" – 11 x 6' (183 cm)

Threaded rod is available cut to any length that you require.

Solid Rod Section
SOLID ROD SECTIONS

Solid rod sections are available in any length up to 1 feet.
Threaded at both ends, these rods can be used to extend air terminals or as main conductor in situations where a rigid conductor is desirable.

COPPER
CR3/8 3/8" (9.5mm) diameter
CR1/2 1/2" (12.7mm) diameter
CR5/8 5/8" (15.9mm) diameter
ALUMINUM
AR1/2 1/2" (12.7mm) diameter
AR55/8 5/8" (15.9mm) diameter

Specify desired length.

Solid rod is also available with just one end threaded.

Custom Threaded Rod
CUSTOM THREADED RODS – CTR

Solid rod sections with standard threads on one end and up to 8 inches of threads on the other.
For use in a variety of thru–roof applications.
Maximum rod length 48".

COPPER CTRC3/8 3/8" (9.5mm) diameter
CTRC1/2 1/2" (10.7mm) diameter
ALUMINUM
CTRA1/2 1/2" (10.7mm) diameter
CTRA5/8 5/8" (15.9mm) diameter

Specify desired overall length of rod and inches of thread (in 1/ " increments) required when ordering.

Cast Swivel Coupling
CAST SWIVEL COUPLINGS– SC

For male to female or female to female connections.
Cast bronze or aluminum with stainless steel fasteners.
Available with 3/8" (9.5mm), 1/ " (1 .7mm) or 5/8" (15.9mm) threads, in combinations to meet your requirements.

Female to female 3" x 3/4" (76mm x 19mm).
Female to male 4" x 3/4" (10 mm x 19mm).

BRASS
SC3/8F–3/8FB
SC3/8F–3/8MB
SC3/8F–1/2FB
SC3/8F–1/2MB
SC1/2F–3/8MB
SC1/2F–1/2FB
SC1/2F–1/2MB
SC1/2F–3/8FB
SC1/2F–5/8MB
SC5/8F–1/2MB
SC5/8F–5/8FB
SC5/8F–5/8MB
ALUMINUM
SC1/2F–1/2FA
SC1/2F–1/2MA
SC1/2F–5/8FA
SC1/2F–5/8MA
SC5/8F–1/2MA
SC5/8F–5/8FA
SC5/8F–5/8MA
THRU–STRUCTURE ASSEMBLIES– TS
TS1 Thru–Roof Assembly
** TS1 Thru–Roof Assembly

Supplied with 12" (30.5cm) threaded rod, stainless steel locking set screws,
EPDM washer, stainless steel washer and nut, rod to air terminal coupling
and 12" (30.5cm) air terminal.

TS2 Thru–Roof or Wall Assembly
** TS2 Thru–Roof or Wall Assembly

Supplied with 12" (30.5cm) threaded rod, stainless steel locking set screws and bolt pressure cable holder.
The fittings are available in aluminum, bronze or one of each.

Thru–Roof or Wall Assembly
** TS3 Thru–Roof or Wall Assembly

For right angle to straight tap. Supplied with 12" (30.5cm) threaded rod, nut and EPDM washer.
The fittings are available in aluminum, bronze or one of each.

Thru–Roof or Wall Assembly
** TS4 Thru–Roof or Wall Assembly

For right angle to straight tap. Supplied with 12" (30.5cm) threaded rod, 2 stainless steel fender washers, 2 EPDM washers, 2 nuts and a fully adjustable bolt pressure cable holder.
The fittings are available in aluminum, bronze or one of each.

Thru–Roof or Wall Assembly
** TS5 Thru–Roof or Wall Assembly

For right angle connections. Supplied with 12" (30.5cm) threaded rod, 2 stainless steel fender washers, 2 EPDM washers, 2 nuts and fully adjustable cable holders.
The fittings are available in aluminum, bronze or one of each.

** TS6 Thru–Roof or Wall Assembly Connector

End has mounting holes for direct attachment to concrete or other surfaces.
Supplied with 12" (30.5cm) threaded rod.
The fittings are available in aluminum, bronze or one of each.

THRU–STRUCTURE ASSEMBLIES FOR 1–1/2" DIAMETER PVC – TS
Rectangle Mount Air Terminal To Horizontal Cable Assembly
** TS7 Rectangle Mount Air Terminal To Horizontal Cable Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 12" (30.5cm) of Schedule 40 PVC tubing, fully adjustable bolt pressure cable holder, EPDM washer, stainless steel hardware, rod to air terminal coupling.
, 12" (30.5cm) air terminal and 2" x 4" (5.1cm x 10.2cm) mount to fit corrugated steel decking or for fastening to any flat surface.

Round Mount – Air Terminal To Horizontal Cable Assembly
** TS8 Round Mount – Air Terminal To Horizontal Cable Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 12" (30.5cm) of Schedule 40 PVC tubing, fully adjust– able bolt pressure cable holder, EPDM washer, stainless steel hardware, rod to air terminal coupling'
12" (30.5cm) air terminal and 3–1/4" (8.3cm) diameter mount for fastening to flat decking.

THRU–STRUCTURE ASSEMBLIES FOR 1–1/2" DIAMETER PVC – TS
Rectangle Mount – Air Terminal To Vertical Cable Assembly
** TS9 Rectangle Mount – Air Terminal To Vertical Cable Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 12" (30.5cm) of Schedule 40 PVC tubing, EPDM washer, stainless steel hardware, rod to air terminal coupling.
12" (30.5cm) air terminal and 2" x 4" (5.1cm x 10.2cm) mount to fit corrugated steel decking or for fastening to any flat decking.

Round Mount – Air Terminal To Vertical Cable Assemblyg
** TS10 Round Mount – Air Terminal To Vertical Cable Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 12" (30.5cm) of Schedule 40 PVC tubing, EPDM washer, stainless steel hardware, rod to air terminal coupling.
12" (30.5cm) air terminal and 3–1/4" (8.3cm) diameter mount for fastening to flat decking.

Rectangle Mount – Cable To Horizontal Cable Assembly
** TS11 Rectangle Mount – Cable To Horizontal Cable Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 12" (30.5cm) of Schedule 40 PVC tubing, stainless steel hardware, fully adjustable bolt cable holder, and 2" x 4" (5.1cm x 10.2cm) mount to fit corrugated steel decking or for fastening to flat decking.

Round Mount – Cable To Horizontal Cable Assembly
** TS12 Round Mount – Cable To Horizontal Cable Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 12" (30.5cm) of Schedule 40 PVC tubing, stainless steel hardware, fully adjustable bolt cable holder, and 3–1/4" (8.3cm) diameter mount for fastening to flat decking

.
THRU–STRUCTURE ASSEMBLIES FOR 1–1/2" DIAMETER PVC– TS
Rectangle Mount – Cable To Vertical Cable Assembly
** TS13 Rectangle Mount – Cable To Vertical Cable Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 12" (30.5cm) of Schedule 40 PVC tubing, stainless steel hardware, and 2" x 4" (5.1cm x 10.2cm) mount to fit corrugated steel decking or for fastening to any flat decking.

Round Mount – Cable to Vertical Cable Assembly
** TS14 Round Mount – Cable to Vertical Cable Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 12" (30.5cm) of Schedule 40 PVC tubing, stainless steel hardware, and 3–1/4" (8.3cm) diameter mount for fastening to flat decking.

TS15 Deckmount Assembly

** TS15 Deckmount Assembly

Supplied with 18" (45.7cm) of 1/2–13 threaded rod, 16" (40.6cm) of Schedule 40 PVC tubing, BB21 base and CC2 top, both have fully adjustable cable holders. Stainless steel hardware.
Easily mounts to flat or corrugated decking.

1 inch PVC Capped Assembly
TS16B 1" PVC Capped Assembly

1" diameter PVC cap for dropping cable into the top end of 1" PVC conduit chases.
Top end has a two–way bronze cable holder, stainless steel hardware and EPDM washer.

Bottom has a brass hex cable holder with stainless steel set screws and nut.
3 inches of 1/2" diameter stainless steel threaded rod runs between.
5–1/4" x 2–1/2" (13.3cm x 6.35cm).

TS16A Aluminum

1" diameter PVC Cap with Aluminum cable holders.

TS16 Bimetal

1" diameter PVC Cap with Aluminum Top and Brass Bottom.

** When ordering Thru–Structure Assemblies – specify material, threaded rod length and diameter. Many lengths and connectors are available for special connections. Call the factory with your specific needs
.
A wide variety of Lightning Arrestors and Surge Protectors are available. Contact the factory for assistance with product selection.
DTK–120/240CM Ditek brand, single phase, hard wired surge arrestor.
DTK–120/240CM Ditek brand, single phase, hard wired surge arrestor.

120/240 VAC two pole, three wire model. UL listed Surge Arrestor.

DTK–120/240CM Plus

As above with indicator light.

AG6503 Intermatic brand, three phase, hard wired surge arrestor.
AG6503 Intermatic brand, three phase, hard wired surge arrestor.

600 VAC three pole, four wire model. UL listed Surge Arrestor.

IG1240R Intermatic Whole Home Panel Protector
IG1240R Intermatic Whole Home Panel Protector

For use with main or subpanels with a capacity of 200 amps or less.
Features dual indicator lights. UL listed to UL 1449.

IG1240FMP3 Flush Mount Kit

Adapter Plate for use with IG1240R when applications require flush mounting of the panel protector.

Surge arrestor model numbers and UL listing status are subject to change as manufacturers comply with new UL requirements. Contact us with your questions.
Ditek brand video line surge protector.
DTK–VSP–A Video/Coax
Ditek brand video line surge protector.

"F" type connectors. UL listed.

Ditek brand screw terminal protection for data, voice and loop circuits
Data/Voice Line

Ditek brand screw terminal protection for data, voice and loop circuits. Available in 1, 2 , 3 and 4 pair configurations. UL listed.

DTK–1P
DTK–2P
DTK–3P
DTK–4P
Surge arrestor model numbers and UL listing status are subject to change as manufacturers comply with new UL requirements. Contact us with your questions.